Portable 500kg aerial  Mobile Aerial Work Hydraulic Lift Platform

Main Parameters

• Loading Capacity     300kg
• Maximum Height     10000mm
• Minimum Height       1500mm
• Platform Size            2250*1150mm
• Lifting Power             2.2kw
• Power Voltage          1phase/220V/50HZ
• Lifting Time               88s
• Cylinder                    100(2Pcs)
• Gear Pump                6ml/r
• Total Weight              1360kg
• Measurement            2650*1350*1500mm

• Loading Capacity on Extension Platform   100kg

•  

  Extension Platform Length     1m

Description:

This upgrade mobile scissor lift has stable structure and the orbit of the machine is very small which gaurantee the safety of the machine. The pulling device can save operator's force a lot, and only the machine is closed totally the pulling device can work.

Main Features:

1. Pointing control of lifting up and down.

2. Driven by electricity, you can control forward and backward on ground, only the machine is totally closed otherwise the pulling device can not work

3. Use slider design which can minimize the orbit a lot, now the orbit of our machine in its highest position is 5cm and this is much smaller than the standard 20cm.

4. The surface of the machine has been derusted by the blasting machine, two bottom-two surface way to paint the machine.

5. Detachable fence on the platform

6. Manganese steel lifting arm in high strength with rectangle shape

7. Anti skid floor in platform

8. The control panels are available on the platforms and ground.

9. Fine grinding cylinder in good sealing performance

10.Neatly folding guardrails make it easy to maneuver through doorways, into elevators and throughout other height-restricted areas.

Optional Features:

Extension Platfrom

Loading Capacity: 300Kg

Platform Size: 900*1000mm

Safety Precaution:

1.The operation voltage on the platform is 24V

2.Emergency stop button on the paltform and ground

3.Auxiliary platform lowering

4.Telescopic legs on the chassis

5.Explosion-proof device for oil tube

6.Low battery protector

7. Charging Protection system

Configurations:

• Electric system: Schneider contactor, SANLICO button, CHNT electrical
• Hydraulic System: Hycman brand power pack ,NOK sealing
• Scissor Arm Support: Hi-strength Manganese steel rectangle tube Q345 B
• Platform Surface : Antiskid checkered plate
• Tire: Ø500-8 Inflated tires
• High-pressure Oil Pip: Double wire hydraulic intensifier rubber hose

Optional Configuration:

• Power Supply: 3phases/380V/50HZ; DC 24V ; manual pump
• Hydraulic Power Pack: Italy brand: Hydrapp/ Swiss brand: Bucher
• Extension Platform
• Rubber Solid Tire
• Flame Proof Control Cabinet